| If your mixer console does not support the selection of mixer sources via its interface (e.g. GPIO) you can use external lines nevertheless. It is necessary to do the assignment of mixer sources to lines either with this parameter or via the macro command TP_SelectMixerSource. The assignment with this parameter is done with every startup, reset and activation of the "SelectSources" mode. Of course the mixer source used must be known to TurboPlayer, meaning: there must be a key with the same name below TurboPlayer\MixerSources\... This parameter makes the line "external", it is not possible to have a subkey "Channel..." at the same time, because this would make the line "internal". |