| If this parameter is 0 TurboPlayer will stop a running element immediately when a line/fader is being closed. In some cases mixer consoles with motor faders send a "line is closed" followed by a "line is open" only a few milliseconds after the first report. Typically this is the case if TurboPlayer tries to move a fader and the user detains the fader. To avoid that Turbo stops the running element you can set this parameter to something like 100ms. TurboPlayer will wait this delay time when a line is closed before it stops the running element. If the line is re-opened before the stop is executed, no stop/start will occur. By default this parameter is identical to the value of the parameter "OpenDelayActive" for lines with mode "variable" (=motor faders) and is 0 by default for all other modes. |